MARLOW ROPES DEFINITIVE ROPE GUIDE, ISSUE 8
POLYESTER COVER | RUBBER CORES DIAMETER: 3-10MM
Excellent quality, high elasticity and with natural rubber that provides a minimum 100% stretch with constant elongation characteristics. Polyester cover is tough and UV resistant offering good abrasion resistance and a great range of standard colours.
BREAK LOAD COLOUR
MATERIAL WIDTH REEL LENGTH
50mm 50m 1800kg red / blue / black
SHOCKCORD WITH DYNEEMA ®
38mm 100m 750kg 25mm 50m 3000
All the benefits of the standard Shockcord, yet with greater durability, increased abrasion resistance & lower friction due to its Dyneema® cover. DIAMETER: 4-6MM
Selection of towstrap, buoyancy bag and jackstay webbing.
8 PLAIT MARSTRON
BUOYANCY BAG WEBBING
38mm wide Polyester webbing available in white. Light weight and ideal for lighter webbing duties.
8 PLAIT POLYPROPYLENE COVER | POLYPROPYLENE CORE | 100M & 200M REELS DIAMETER: 6-10mm
APPLICATION : THROW LINES AND PAINTERS
50mm wide polyester webbing available in 3 strong colours. Tough, strong and low stretch webbing for Toe Straps on dinghy’s and sports boats. TOE STRAP WEBBING
BREAK LOAD (kg) WEIGHT (kg/100m)
Lightweight, High Visibility floating line. Soft and easily handled, 8 Plait Marstron is ideal for rescue throw lines, tow ropes and painters.
JACK STAY Tough 25mm wide polyester webbing offers a 3 tonne break load and is perfect for those heavy duty jobs.
8 PLAIT STANDARD
D12 SOFT SHACKLES Factory spliced D12 Soft Shackles offer outstanding strength at a fraction of the weight of conventional steel shackles.
8 PLAIT POLYESTER
BREAK LOAD (kg)
100% polyester line for flag halyards and bungees. Also used as leach lines, and whipping large diameter ropes as well as decorative lashings.
GUARD RAIL NETTING
Knotted white nylon netting. Handy Tip – measure the distance the netting needs to run fore and aft and allow an additional 25%. This allows for take up in the length caused by the drop on standard stanchions (61cm / 24”).
BREAK LOAD (kg)
LENGTH (m) 550 Important note: The lengths listed in the specification are for both the closed circumference and open length. Closed length is approximately half the open length assuming the bearing surfaces are not too big. All these figures are approximate as they are hand made by artisans. 200 250 300 350 450
Made with FlippingBook Ebook Creator